COMPARTMENT
BARRIERS

Bare Cross Laminated Timber Floors - Fire Stopping Service Penetrations Through Core Holes

FRL-/90/90

Firestopping Various Service Penetrations Through Core Holes in Bare Xlam Cross Laminated Timber Floors

 

Over 46 TBA Firefly™ FRL-/90/90 Systems protecting Electrical, Communications, Mechanical, Fire & Security, Plumbing & Hydraulic & Wet Fire, service Penetrations passing through Core Holes in XLAM 90 Minute Bare CLT 130mm thick Floor System.

Over 46 TBA Firefly™ FRL-/60/60 Systems protecting Electrical, Communications, Mechanical, Fire & Security, Plumbing & Hydraulic & Wet Fire service Penetrations passing through Core Holes in XLAM 60 Minute Bare CLT 130mm thick Floor System.

All Tested in accordance with AS1530.4-2014 and Assessed in accordance with AS4072.1-2005 and confirmed in Reports from an Accredited Testing Laboratory.

Install the TBA Firefly™ CLT Penowrap® Gaskets then Firestop the service Penetration with the specified TBA Firefly™ Fire Stopping Products contained within the referenced Regulatory Information Report.

The TBA Firefly™ CLT Penowrap® Gaskets for core holes are currently supplied in the following sizes:

PRODUCT CODE

DESCRIPTION

TBAFF P CLTG 100

TBAFF P CLTG 100MM ID 200MM OD

TBAFF P CLTG 120

TBAFF P CLTG 120MM ID 220MM OD

TBAFF P CLTG 170

TBAFF P CLTG 170MM ID 270MM OD

TBAFF P CLTG 40

TBAFF P CLTG 40MM ID 140MM OD

TBAFF P CLTG 50

TBAFF P CLTG 50MM ID 150MM OD

TBAFF P CLTG 60

TBAFF P CLTG 60MM ID 160MM OD

TBAFF P CLTG 65

TBAFF P CLTG 65MM ID 165MM OD

TBAFF P CLTG 70

TBAFF P CLTG 70MM ID 170MM OD

TBAFF P CLTG 75

TBAFF P CLTG 75MM ID 175MM OD

TBAFF P CLTG 85

TBAFF P CLTG 85MM ID 185MM OD

 

For Compliance with the NCC please contact us to request your copy of:

Warringtonfire Report No: FAS190236 RIR Specific ID No's: H121 through to H140

This Report is from an Accredited Testing Laboratory which meets Specification A2.3 Section 2 (c) of NCC2016 Amendment 1 (Including Prior Versions) & Schedule 5 Section 2 (c) of NCC2019 (Including Amendment 1) for determination of an FRL.